Editing Template:Preparing the wood (section)

==Preparing the wood==
Do not simply dunk the wood into your tank. 
Your piece of wood has probably been sitting on a shelf in the shop for a long time. It may have collected chemical sprays from the air and often will be coated with dust. 

Take the wood and rinse it under normal tap water and leave it in a bucket of tap water for several days. If the water turns very dark brown then the wood probably hasn't been pretreated and you'll need to replace the water and re-examine the water every 2 days until it shows signs of lessening. This can take months in a untreated piece.

If it is pretreated it should sink rapidly within a day and will not leak out high levels of tannins.
Once you're happy with the way the wood is looking, add to your aquarium. 

*Don't waste the tannins in the water, feed it to your potted plants, it's a fair fertiliser.

*Boiling wood in water for 6-12 hours is a quick alternative to letting it sit soaking in water for weeks. But this is a <u>very</u> smelly and dirty process for most home aquarists. It also destroys any beneficial fungus or bacteria there may have been on it.

*One method occasional used is to coat the dry bogwood with clear Polyurethane varnish paint, this will lock the water out and prevent tannins leaking into the water. But you will lose all the health benefits the wood gives to your tank and animals.
<P style="clear:both;>